🥁EP-133 K.O. II + Playtronica — TouchMe, Playtron, Biotron
EP-133 K.O. II, EP-1320 and EP-40 are not USB hosts. Play them from a Playtronica device via a computer or a USB MIDI host box to TRS MIDI.
Part of: Playtronica + Teenage Engineering — the compatibility table for every TE device.
Short answer: not directly over USB. EP-133 K.O. II is a USB MIDI device, not a host. TE's guide says "for usb midi keyboards you will need a midi host" — a computer or a dedicated MIDI host box (EP-133 how-to, checked 18 Nov 2026). EP-1320 medieval and EP-40 riddim have the same note in their guides (EP-1320, EP-40). All three have MIDI in and out on 3.5 mm TRS jacks.
We have not tested these devices with Playtronica yet. The routes below follow TE's own instructions for MIDI keyboards.
Route 1 — through a computer
Playtronica device → USB → computer → USB → EP-133.
- Connect both the Playtronica device and the EP-133 to the computer. Both appear as MIDI devices.
- Route MIDI from the Playtronica device to the EP-133 in your DAW (a MIDI track with the Playtronica device as input and EP-133 as output) or a MIDI routing app.
- Touch the device. The EP-133 lights its USB icon when it detects incoming notes.
Route 2 — no computer: USB MIDI host box + TRS
Playtronica device → USB → USB MIDI host box → MIDI DIN → TRS-to-DIN cable → EP-133 MIDI in.
- A USB MIDI host box powers the Playtronica device and turns its USB MIDI into DIN MIDI — for example the CME H4MIDI WC described on our hardware page.
- From the box's DIN output, use a 3.5 mm TRS to MIDI DIN cable into the EP-133 MIDI in. TE says this cable may be needed "depending on your midi keyboard".
- TRS Type A or B: TE's EP-133 guide does not state the TRS type. Check before you buy the cable.
- The EP-133 lights its MIDI icon when it detects incoming notes.
Scales has its own TRS MIDI output. Scales can go straight into the EP-133 MIDI in with a 3.5 mm TRS cable, no host box — as long as both use the same TRS type. We have not tested it yet.
Which pads play
From TE's MIDI implementation for EP-133 (EP-133 system, checked 18 Nov 2026):
- The EP-133 receives on its basic channel, 1 by default (changeable 1–16). A setting lets it receive on all channels.
- Notes 36–47 play group A, 48–59 group B, 60–71 group C, 72–83 group D.
- TouchMe and Playtron send on channel 1. Biotron sends the plant on channel 2 and the light on channel 3 — set the EP-133 to receive all channels, or set Biotron's plant channel to 1 in Biotron Settings.
- If the wrong group plays, change the device's notes or octave in Playtronica Settings, where your device offers it, so the notes land in the group you want.
- To play one sound across many notes, TE describes a keys mode that plays one pad across the keyboard.
Tips from other K.O. II users
From EP-133 owners and press, not verified by Playtronica or TE. Links checked 18 Nov 2026.
- TRS Type A. A detailed owner's write-up says the EP-133 MIDI jacks are Type A (djjondent blog, Dec 2023). TE's guide does not state the type.
- "MIDI in not working" is often a Type B cable. Owners fixed it with a Type A cable or an A/B converter (Reddit thread "KOII MIDI in not working", 2025 — we could only see a summary).
- Sync jack ≠ MIDI. The 3.5 mm sync jack sends pulses, not MIDI. Use the MIDI in jack for notes (djjondent blog).
- No USB host. Sound On Sound's review also notes that the USB-C port works with a computer but does not host a controller.
Frequently asked questions
Can I plug a USB MIDI controller straight into EP-133 K.O. II?
No. EP-133 K.O. II is not a USB host. Teenage Engineering says USB MIDI keyboards need a MIDI host — a computer or a dedicated MIDI host box. Use a host box with the EP-133's 3.5 mm TRS MIDI input, or route through a computer.
How do I connect TouchMe or Playtron to EP-133 without a computer?
Use a USB MIDI host box: plug the Playtronica device into its USB host port, then a TRS-to-DIN MIDI cable from the box's DIN output into the EP-133 MIDI in. Check the TRS type (A or B) of your cable. We have not tested this chain yet.
Why does Biotron not play my EP-133?
Biotron sends the plant on MIDI channel 2 and the light sensor on channel 3, while EP-133 listens on channel 1 by default. Set EP-133 to receive all channels, or set Biotron's plant channel to 1 in Biotron Settings.
Does the same work for EP-1320 medieval and EP-40 riddim?
Yes, the same routes apply: TE's guides for EP-1320 and EP-40 also say USB MIDI keyboards need a MIDI host, and both have TRS MIDI in and out. Their pad note maps may differ — check each device's guide.
KO II MIDI in not working — what should I check?
Make sure the cable goes into the MIDI in jack, not the sync jack, and that the TRS cable type matches. Owners report that the EP-133 uses Type A and that a Type B cable is a common cause (TE's guide does not state the type). Also check the MIDI channel: EP-133 listens on channel 1 by default; Biotron sends on channel 2.
Still stuck
Email [email protected] with the subject EP-133 setup, your Playtronica device and how it is connected. We aim for 24 hours, but a reply may take up to 3 business days.
See also
- Playtronica + Teenage Engineering — all TE devices
- Hardware synths, USB host boxes and TRS MIDI
- Scales — TRS MIDI output
- Biotron MIDI and CC
Teenage Engineering, K.O. II and EP-133 are trademarks of Teenage Engineering. Playtronica is not affiliated with Teenage Engineering.