∿ playtronica / help

🟠Playtronica + Teenage Engineering: OP-Z, OP-XY, OP-1, EP-133

Which Teenage Engineering devices TouchMe, Playtron, Biotron, Scales and Orbita can play — with or without a computer, which cable or adapter, which firmware. OP-Z tested 18 Nov 2026.


Every Playtronica device is a class-compliant USB MIDI controller. Some Teenage Engineering (TE) devices can take it directly — they power it and play its notes, no laptop. Others have no USB host port and need a computer or a small USB MIDI host box in between.

Compatibility at a glance

Legend: ✅ works, tested by Playtronica, latest firmware · 🟡 should work, not tested by us yet · 🔌 works through a computer or a USB MIDI host box · ❔ unknown · ❌ not possible.

TE device TouchMe Playtron Biotron Scales Orbita Computer needed?
OP-Z ✅ ✅ ✅ 🟡 testing 🟡 testing No — USB-C data cable only
OP-XY 🟡 🟡 🟡 🟡 🟡 No — USB-C data cable
OP-1 field 🟡 🟡 🟡 🟡 🟡 No — USB-C data cable
EP-133 K.O. II 🔌 🔌 🔌 🔌 or TRS cable 🔌 Yes, or a USB MIDI host box
EP-1320 medieval, EP-40 riddim 🔌 🔌 🔌 🔌 or TRS cable 🔌 Yes, or a USB MIDI host box
TX-6 ❔ ❔ ❔ ❔ ❔ Unknown — see below
OP-1 (original) ❔ ❔ ❔ ❔ ❔ Unknown — see below
Pocket Operators (PO-12, PO-33 …) ❌ ❌ ❌ ❌ ❌ Pocket Operators have no MIDI input

Update to the latest firmware

Before you connect to a TE device, update your Playtronica device to the latest firmware at settings.playtronica.com. TE devices that work as a USB host accept a device with one MIDI port — OP-Z's guide says devices that "present themselves as more than one midi device" are not supported (TE OP-Z guide, USB, checked 18 Nov 2026). Older Playtronica firmware shows up as two ports; the latest shows up as one.

What each TE device offers for an external MIDI controller

TE device USB host (plug a controller in directly) Power to the controller TRS MIDI Source (checked 18 Nov 2026)
OP-Z Yes, USB-C Up to 100 mA; use a powered USB-C hub for more No TRS jack OP-Z guide: USB
OP-XY Yes — "usb type-c audio/midi host & device" Not stated; TE suggests a powered hub if a device needs more Multi-out 3.5 mm jack can send MIDI (Type A) OP-XY hardware overview, OP-XY how-to
OP-1 field Yes — "usb midi host & device" Not stated No TRS jack (Bluetooth LE MIDI instead) OP-1 field guide, PDF
EP-133 K.O. II No — "for usb midi keyboards you will need a midi host" — MIDI in and out on 3.5 mm TRS EP-133 how-to
EP-1320 medieval No — same as EP-133 — MIDI in and out on 3.5 mm TRS EP-1320 how-to
EP-40 riddim No — same as EP-133 — MIDI in and out on 3.5 mm TRS EP-40 how-to
TX-6 Not confirmed Not stated Not confirmed TX-6 guide
OP-1 (original) Not stated in TE's guide — Not stated OP-1 guide
Pocket Operators No USB or MIDI — 3.5 mm sync only — No PO-33 guide

TX-6 and OP-1 (original). We could not confirm from TE's own guides whether these accept a class-compliant USB MIDI controller. Until we test them, connect through a computer. If you have tried it, tell us and we will add your result.

Pocket Operators. Pocket Operators have no MIDI input, so a Playtronica device cannot play them directly. Use another synth or app as the sound source.

Good to know for every TE device

  • Use a USB data cable. A charge-only cable lights the device but carries no MIDI.
  • Turn on incoming MIDI on the TE device. OP-Z ignores incoming notes until you enable it (Tempo + Screen, key 2).
  • Match MIDI channels. TouchMe and Playtron send on channel 1. Biotron sends the plant on channel 2 and the light sensor on channel 3. Each device's page shows how to set the TE track channel.
  • Not detected? Try a powered USB hub. TE's OP-Z guide says the port gives a maximum of 100 mA and recommends a good-quality powered USB-C hub for hungrier devices.

Frequently asked questions

Which Teenage Engineering devices can I play with a Playtronica device without a computer?

OP-Z, OP-XY and OP-1 field have a USB host port, so a Playtronica device can plug straight in. OP-Z works with TouchMe, Playtron and Biotron on the latest firmware (we tested it on 18 November 2026); Scales and Orbita should work too, we are testing them. OP-XY and OP-1 field are USB hosts according to TE, but we have not tested them yet. EP-133 K.O. II, EP-1320 and EP-40 need a computer or a USB MIDI host box.

Why does my OP-Z not recognize my USB MIDI controller?

OP-Z does not support devices that show up as more than one MIDI port, and it supplies at most 100 mA. OP-Z ignores older Playtronica firmware — update to the latest. Also turn on incoming MIDI (Tempo + Screen, key 2) and use a data cable.

Can I connect TouchMe, Playtron or Biotron to EP-133 K.O. II?

Not directly over USB — EP-133 is not a USB host. Connect the Playtronica device to a computer or a USB MIDI host box, then send MIDI to EP-133 over USB or its 3.5 mm TRS MIDI input. Our EP-133 page shows both routes.

Do I need an adapter to connect a Playtronica device to OP-Z or OP-XY?

No adapter box is needed for OP-Z: a USB-C to USB-C data cable is enough. OP-XY is also a USB host, so the same cable should work, but we have not tested it yet. Older advice that OP-Z needs an adapter is out of date.

Can a Pocket Operator be played by a MIDI controller?

No. Pocket Operators have no MIDI input — only a 3.5 mm sync input. A Playtronica device cannot play them directly.

Which Playtronica firmware do I need for Teenage Engineering gear?

The latest firmware for your device, from settings.playtronica.com. OP-Z does not see older Playtronica firmware.

See also

Teenage Engineering, OP-Z, OP-XY, OP-1 and K.O. II are trademarks of Teenage Engineering. Playtronica is not affiliated with Teenage Engineering. Facts about TE devices come from TE's official guides, linked above, checked 18 November 2026.

Still stuck

Email [email protected] with the subject Teenage Engineering setup, your TE device, your Playtronica device and its firmware version. We aim for 24 hours, but a reply may take up to 3 business days.

Related
Did this answer your question?
∿ Sound & Software / Playtronica + Teenage Engineering: OP-Z, OP-XY, OP-1, EP-133Edit this page on GitHub →